$–
3 more selections to go
What Determines Tree Removal Cost in Upstate SC?
Tree Size
Height and trunk diameter are the biggest cost drivers. A 20-foot Bradford pear is a 2-hour job. An 80-foot oak with a 36-inch trunk is a full day. Larger trees require more crew time, more equipment capacity, and more disposal volume.
Proximity to Structures
A tree in an open backyard can be felled in one piece. A tree overhanging a roofline must be removed in sections from above: each section rigged and lowered to prevent damage. This adds hours and skill requirement to the job.
Access
Can equipment reach the tree? A tight side yard between two houses, a locked gate, or a tree in the middle of a landscaped bed all add time. Crane or aerial lift requirements are quoted separately and add $500–$1,500.
Species and Condition
Dense hardwoods (oak, hickory) take longer to cut and chip than softer species. Decayed trees are less predictable during removal and require more careful rigging. Active termite or beetle infestations affect how a tree can be safely worked.
Permit Requirements
Inside City of Greenville limits, every tree removal requires a permit, regardless of trunk size. Martin Tree and Turf Care handles the permit application. An arborist report is optional, but for a tree that looks healthy and is actually in poor health, a signed report can reduce or eliminate the city mitigation fee. Permit processing adds a few days to the timeline.
Stump Grinding
Stump grinding is quoted separately from removal. Standard grinding (6–8" below grade) runs $75–$350+ per stump depending on diameter. Grinding to 12" (for replanting) costs more. Multiple stumps are discounted as a package.
Frequently Asked Questions
How accurate is this tree removal cost calculator?
The calculator gives a ballpark range based on common Upstate SC pricing patterns: tree size, proximity to structures, and site access. Actual cost depends on what our crew sees on site: species, condition, trunk diameter, root system, and what is directly below. The estimate is a starting point, not a binding quote. Free written estimates are provided after a site visit.
What is not included in the tree removal cost estimate?
Stump grinding is priced separately ($75–$350+ depending on stump diameter). City of Greenville permit and mitigation fees, where they apply, are not included. Debris hauling beyond standard chipping, such as cord wood cut and stacked, may also be priced separately. These are discussed at the estimate.
Why does access affect tree removal cost so much?
Access determines what equipment can reach the tree and how sections must be rigged. A 60-foot oak in an open front yard can be worked with ground crew and a chipper. The same oak behind a 36-inch gate in a tight backyard requires hand-rigging every section down. That takes 2 to 3 times longer and adds significant cost. When you get a site visit, our ISA Certified Arborist walks both the tree and the access route before quoting the job.
Does it cost more to remove a tree that is leaning or already fallen?
Leaning trees add cost because they require different rigging to control the fall direction and protect structures beneath. Fallen trees can be less expensive than standing removal if they are in an open area, but fallen trees on structures, fences, or power lines require careful sectional extraction and may cost more than a straightforward standing removal.
Know Your Exact Price Before Any Work Begins
The certified arborist evaluates your tree in person and puts the price in writing. That's the number you pay: no verbal quotes that change on arrival, no invoice surprises. No pressure. No obligation.
Get Free Estimate